00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
	Latency: 0 set, cache line size 08
00: 57 10 02 00 06 00 80 30 40 00 00 06 08 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 set
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: 80800000-809fffff
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 11 10 26 00 07 01 b0 02 02 00 04 06 00 40 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 11 11 a0 22
20: 80 80 90 80 81 80 71 80 00 00 00 00 00 00 00 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 06 03

00:10.0 VGA compatible controller: ATI Technologies Inc Rage 128 RE (prog-if 00 [VGA])
	Subsystem: Unknown device b530:0408
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 8 min, 16 set, cache line size 08
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at 84000000 (32-bit, prefetchable)
	Region 1: I/O ports at 2000 [disabled]
	Region 2: Memory at 80a00000 (32-bit, non-prefetchable)
	Expansion ROM at 80a20000 [disabled]
	Capabilities: [5c] Power Management version 1
		Flags: PMEClk- AuxPwr- DSI- D1+ D2- PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 02 10 45 52 86 00 b0 02 00 00 00 03 08 10 00 00
10: 08 00 00 84 01 20 00 00 00 00 a0 80 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 30 b5 08 04
30: 00 00 a2 80 5c 00 00 00 00 00 00 00 ff 01 08 00

01:00.0 FireWire (IEEE 1394): Texas Instruments PCILynx/PCILynx2 IEEE 1394 Link Layer Controller (rev 04) (prog-if 00 [Generic])
	Subsystem: Apple Computer Inc.: Unknown device 001c
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 3 min, 4 max, 16 set, cache line size 20
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at 80885000 (32-bit, non-prefetchable) [disabled]
	Region 1: Memory at 808c0000 (32-bit, non-prefetchable) [disabled]
	Region 2: Memory at 808b0000 (32-bit, non-prefetchable) [disabled]
	Expansion ROM at 808a0000 [disabled]
00: 4c 10 00 80 14 00 00 02 04 00 00 0c 20 10 00 00
10: 00 50 88 80 00 00 8c 80 00 00 8b 80 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 6b 10 1c 00
30: 00 00 8a 80 00 00 00 00 00 00 00 00 00 01 03 04

01:01.0 IDE interface: CMD Technology Inc PCI0646 (rev 07) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: CMD Technology Inc: Unknown device 0646
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 2 min, 4 max, 64 set
	Interrupt: pin A routed to IRQ 26
	Region 0: I/O ports at 1c40
	Region 1: I/O ports at 1c30
	Region 2: I/O ports at 1c20
	Region 3: I/O ports at 1c10
	Region 4: I/O ports at 1c00
	Capabilities: [60] Power Management version 1
		Flags: PMEClk- AuxPwr- DSI+ D1+ D2+ PME-
		Status: D0 PME-Enable- DSel=0 DScale=3 PME-
00: 95 10 46 06 05 00 90 02 07 8f 01 01 00 40 00 00
10: 41 1c 00 00 31 1c 00 00 21 1c 00 00 11 1c 00 00
20: 01 1c 00 00 00 00 00 00 00 00 00 00 95 10 46 06
30: 00 00 00 00 60 00 00 00 00 00 00 00 0e 01 02 04

01:02.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 11)
	Subsystem: Hauppage computer works Inc.: Unknown device 13eb
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 16 min, 40 max, 16 set
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at 80884000 (32-bit, prefetchable) [disabled]
	Capabilities: [44] Vital Product Data
	Capabilities: [4c] Power Management version 2
		Flags: PMEClk- AuxPwr- DSI+ D1- D2- PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 9e 10 6e 03 04 00 90 02 11 00 00 04 00 10 80 00
10: 08 40 88 80 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 eb 13
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 01 10 28

01:02.1 Multimedia controller: Brooktree Corporation Bt878 (rev 11)
	Subsystem: Hauppage computer works Inc.: Unknown device 13eb
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 4 min, 255 max, 16 set
	Interrupt: pin A routed to IRQ 0
	Region 0: Memory at 80883000 (32-bit, prefetchable) [disabled]
	Capabilities: [44] Vital Product Data
	Capabilities: [4c] Power Management version 2
		Flags: PMEClk- AuxPwr- DSI+ D1- D2- PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 9e 10 78 08 04 00 90 02 11 00 80 04 00 10 80 00
10: 08 30 88 80 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 eb 13
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 01 04 ff

01:03.0 SCSI storage controller: Adaptec AIC-7861 (rev 03)
	Subsystem: Adaptec: Unknown device 7861
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 4 min, 4 max, 16 set, cache line size 08
	Interrupt: pin A routed to IRQ 24
	Region 0: I/O ports at 1800
	Region 1: Memory at 80882000 (32-bit, non-prefetchable)
	Expansion ROM at 80890000 [disabled]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- AuxPwr- DSI+ D1- D2- PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 04 90 78 61 07 00 90 02 03 00 00 01 08 10 00 00
10: 01 18 00 00 00 20 88 80 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 04 90 61 78
30: 00 00 89 80 dc 00 00 00 00 00 00 00 00 01 04 04

01:04.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
	Subsystem: Netgear FA310TX
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 16 set
	Interrupt: pin A routed to IRQ 25
	Region 0: I/O ports at 1400 [disabled]
	Region 1: Memory at 80880000 (32-bit, non-prefetchable) [disabled]
	Expansion ROM at 80900000 [disabled]
00: ad 11 02 00 04 00 80 02 20 00 00 02 00 10 00 00
10: 01 14 00 00 00 00 88 80 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 85 13 04 f0
30: 00 00 90 80 00 00 00 00 00 00 00 00 00 01 00 00

01:05.0 Class ff00: Apple Computer Inc. Paddington Mac I/O
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 16 set, cache line size 08
	Region 0: Memory at 80800000 (32-bit, non-prefetchable)
00: 6b 10 17 00 16 00 00 02 00 00 00 ff 08 10 00 00
10: 00 00 80 80 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:06.0 USB Controller: OPTi Inc. 82C861 (rev 10) (prog-if 10 [OHCI])
	Subsystem: OPTi Inc.: Unknown device c861
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
	Latency: 16 set, cache line size 08
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at 80881000 (32-bit, non-prefetchable)
00: 45 10 61 c8 16 00 80 82 10 10 03 0c 08 10 00 00
10: 00 10 88 80 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 45 10 61 c8
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00

