Adaptec AIC7xxx driver version: 5.1.28/3.2.4
Compile Options:
  TCQ Enabled By Default : Disabled
  AIC7XXX_PROC_STATS     : Enabled
  AIC7XXX_RESET_DELAY    : 15

Adapter Configuration:
           SCSI Adapter: Adaptec AIC-7850 SCSI host adapter
                           Narrow Controller at PCI 1/4/0
    PCI MMAPed I/O Base: 0x80083000
 Adapter SEEPROM Config: SEEPROM found and used.
      Adaptec SCSI BIOS: Enabled
                    IRQ: 54
                   SCBs: Active 0, Max Active 1,
                         Allocated 15, HW 3, Page 255
             Interrupts: 70
      BIOS Control Word: 0x10b6
   Adapter Control Word: 0x0053
   Extended Translation: Enabled
Disconnect Enable Flags: 0x00ff
 Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 8
    Tagged Queue By Device array for aic7xxx host instance 0:
      {255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
    Actual queue depth per device for aic7xxx host instance 0:
      {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}

Statistics:

(scsi0:0:0:0)
  Device using Narrow/Sync transfers at 10.0 MByte/sec, offset 15
  Transinfo settings: current(25/15/0/0), goal(25/15/0/0), user(25/15/0/0)
  Total transfers 24 (24 reads and 0 writes)
             < 2K      2K+     4K+     8K+    16K+    32K+    64K+   128K+
   Reads:      24       0       0       0       0       0       0       0
  Writes:       0       0       0       0       0       0       0       0


