LIRC libraries
Linux Infrared Remote Control
ir_remote_types.h
Go to the documentation of this file.
1 /****************************************************************************
2 ** ir_remote_types.h *******************************************************
3 ****************************************************************************
4 *
5 * ir_remote_types.h - describes and decodes the signals from IR remotes
6 *
7 * Copyright (C) 1996,97 Ralph Metzler <rjkm@thp.uni-koeln.de>
8 * Copyright (C) 1998 Christoph Bartelmus <lirc@bartelmus.de>
9 *
10 */
11 
19 #ifndef IR_REMOTE_TYPES_H
20 #define IR_REMOTE_TYPES_H
21 
22 #ifdef __cplusplus
23 extern "C" {
24 #endif
25 
26 #include <stdint.h>
27 
28 #include <sys/time.h>
29 #include <unistd.h>
30 #include <string.h>
31 #include <math.h>
32 #include <stdlib.h>
33 #if defined(__linux__)
34 #include <linux/types.h>
35 #endif
36 
37 #ifdef HAVE_KERNEL_LIRC_H
38 #include <linux/lirc.h>
39 #else
40 #include "media/lirc.h"
41 #endif
42 
47 typedef uint64_t ir_code;
48 
53 struct ir_code_node {
54  ir_code code;
55  struct ir_code_node* next;
56 };
57 
64 struct ir_ncode {
66  char* name;
67 
70 
72  int length;
73 
75  lirc_t* signals;
76 
79  struct ir_code_node* next;
80 
84 
87 
90 };
91 
92 /*
93  * struct ir_remote
94  * defines the encoding of a remote control
95  */
96 
97 /* definitions for flags */
98 
99 #define IR_PROTOCOL_MASK 0x07ff
100 
101 /* protocols: must not be combined */
102 /* Don't forget to take a look at config_file.h when adding new flags */
103 
104 #define RAW_CODES 0x0001
105 #define RC5 0x0002
106 #define SHIFT_ENC RC5
107 /* Hm, RC6 protocols seem to have changed the biphase semantics so
108  * that lircd will calculate the bit-wise complement of the codes. But
109  * this is only a guess as I did not have a datasheet... */
110 
111 #define RC6 0x0004
112 #define RCMM 0x0008
113 #define SPACE_ENC 0x0010
114 #define SPACE_FIRST 0x0020
115 #define GOLDSTAR 0x0040
116 #define GRUNDIG 0x0080
117 #define BO 0x0100
118 #define SERIAL 0x0200
119 #define XMP 0x0400
121 /* additinal flags: can be orred together with protocol flag */
122 #define REVERSE 0x0800
123 #define NO_HEAD_REP 0x1000
124 #define NO_FOOT_REP 0x2000
125 #define CONST_LENGTH 0x4000
126 #define REPEAT_HEADER 0x8000
128 #define COMPAT_REVERSE 0x00010000
133 #define REPEAT_MAX_DEFAULT 600
134 
135 #define DEFAULT_FREQ 38000
136 
137 #define IR_PARITY_NONE 0
138 #define IR_PARITY_EVEN 1
139 #define IR_PARITY_ODD 2
140 
142 struct decode_ctx_t {
149 };
150 
151 
155 struct ir_remote {
156  const char* name;
157  const char* driver;
158  struct ir_ncode* codes;
159  int bits;
160  int flags;
161  int eps;
162  unsigned int aeps;
169  int dyncode;
170  struct ir_ncode dyncodes[2];
172  /* pulse and space lengths of: */
173 
174  lirc_t phead, shead;
175  lirc_t pthree, sthree;
176  lirc_t ptwo, stwo;
177  lirc_t pone, sone;
178  lirc_t pzero, szero;
179  lirc_t plead;
180  lirc_t ptrail;
181  lirc_t pfoot, sfoot;
182  lirc_t prepeat, srepeat;
188  lirc_t pre_p, pre_s;
189  lirc_t post_p, post_s;
191  uint32_t gap;
192  uint32_t gap2;
193  uint32_t repeat_gap;
207  unsigned int min_code_repeat;
208  unsigned int freq;
209  unsigned int duty_cycle;
213  /* serial protocols */
214  unsigned int baud;
215  unsigned int bits_in_byte;
216  unsigned int parity;
217  unsigned int stop_bits;
223  /* end of user editable values */
224 
225  ir_code toggle_bit_mask_state;
226  int toggle_mask_state;
227  int repeat_countdown;
228  struct ir_ncode* last_code;
230  int reps;
231  struct timeval last_send;
237  lirc_t min_gap_length;
238  lirc_t max_gap_length;
239  lirc_t min_pulse_length, max_pulse_length;
240  lirc_t min_space_length, max_space_length;
243  struct ir_remote* next;
244 };
245 
246 #ifdef __cplusplus
247 }
248 #endif
249 
250 #endif
uint64_t ir_code
Denotes an internal coded representation for an IR transmission.
State describing code, pre, post + gap and repeat state.
ir_code code
Code part, matched to code defintion.
int repeat_flag
True if code is a repeated one.
ir_code post
post data, sent after code.
lirc_t min_remaining_gap
Estimated min time of trailing gap.
lirc_t max_remaining_gap
Estimated max time of trailing gap.
ir_code pre
pre data, before code.
An ir_code for entering into (singly) linked lists, i.e.
IR Command, corresponding to one (command defining) line of the configuration file.
struct ir_ncode * next_ncode
Next code in recorded buttons list.
struct ir_code_node * next
Linked list of the subsequent ir_code's, after the first one.
ir_code code
The first code of the command.
struct ir_code_node * transmit_state
(private)
int length
(private)
lirc_t * signals
(private)
struct ir_code_node * current
Should point at the ir_code currently being transmitted, or NULL if none.
char * name
Name of command.
One remote as represented in the configuration file.
const char * driver
Name of driver for LIRCCODE cases.
uint32_t repeat_gap
time between two repeat codes if different from gap
lirc_t stwo
2 (only used for RC-MM)
unsigned int freq
modulation frequency
int suppress_repeat
suppress unwanted repeats
unsigned int aeps
detecting very short pulses is difficult with relative tolerance for some remotes,...
uint32_t gap2
time between signals in usecs
lirc_t min_total_signal_length
how long is the shortest signal including gap
unsigned int stop_bits
mapping: 1->2 1.5->3 2->4
unsigned int bits_in_byte
default: 8
struct ir_ncode dyncodes[2]
helper structs for unknown buttons
lirc_t sfoot
foot
ir_code rc6_mask
RC-6 doubles signal length of some bits.
lirc_t max_remaining_gap
gap range
lirc_t ptrail
trailing pulse
unsigned int duty_cycle
0<duty cycle<=100 default: 50
lirc_t min_gap_length
how long is the shortest gap
ir_code repeat_mask
mask defines which bits are inverted for repeats
lirc_t srepeat
indicate repeating
ir_code pre_data
data which the remote sends before actual keycode
int bits
bits (length of code)
int post_data_bits
length of post_data
ir_code ignore_mask
mask defines which bits can be ignored when matching a code
int release_detected
set by release generator
lirc_t plead
leading pulse
lirc_t sthree
3 (only used for RC-MM)
lirc_t shead
header
lirc_t szero
0
struct timeval last_send
time last_code was received or sent
ir_code post_data
data which the remote sends after actual keycode
ir_code toggle_mask
Sharp (?) error detection scheme.
int flags
flags
unsigned int baud
can be overridden by [p|s]zero, [p|s]one
int min_repeat
code is repeated at least x times code sent once -> min_repeat=0
int manual_sort
If set in any remote, disables automatic sorting.
lirc_t post_s
signal between keycode and post_code
lirc_t pre_s
signal between pre_data and keycode
uint32_t gap
time between signals in usecs
int eps
eps (relative tolerance)
char * dyncodes_name
name for unknown buttons
struct ir_ncode * last_code
code received or sent last
struct ir_ncode * toggle_code
toggle code received or sent last
unsigned int min_code_repeat
meaningful only if remote sends a repeat code: in this case this value indicates how often the real c...
lirc_t sone
1
const char * name
name of remote control
ir_code toggle_bit_mask
previously only one bit called toggle_bit
unsigned int parity
currently unsupported
int pre_data_bits
length of pre_data
lirc_t max_gap_length
how long is the longest gap
int dyncode
last received code
lirc_t max_total_signal_length
how long is the longest signal including gap
lirc_t min_remaining_gap
remember gap for CONST_LENGTH remotes
int toggle_bit
obsolete